Additional information
| Child override REGEN-Floc® is used to clarify the water column by dropping out the suspended particles that make it appear muddy or green. REGEN-Floc® is a highly charged inorganic polymer that binds these microscopic particles together to form larger particles (flocs) that sink to the base of your water body leaving crystal clear water. |
| Child override Binds phosphorus in the water column Improves water quality and clarity within hours Eliminates internal phosphorus re-cycling from the sediment Safe and easy liquid formulation with no irrigation restrictions Does not impact water pH or alkalinity Maintains desired turbidity, TSS, and Secchi |
| Child override The dose rate required is specific to your water body. Most waterbodies will flocculate within the specified dose rate, however, for accurate dose rates, jar testing is required. Please contact your Parklink representative for more information. Dose Rate = 25 – 45 mL/m³ *Guidance only, contact your Parklink rep if you need help to determine the ideal dose rate for your pond. Calculate the required amount to be applied to your water body. Dilute the REGEN-Floc® with enough tap water to achieve complete coverage of the pond area with your chosen method of application. Spray the diluted REGEN-Floc® over the entire surface area of the water body with a pressurised sprayer or high-pressure hose. If an even spray coverage cannot be achieved thoroughly mix the product into the entire water body with a recirculation pump, aerator, circulator or motorboat. Keep mixing until the product is evenly distributed throughout the pond. Turn off mixing devices and allow 12-24 hours to settle. Apply during calm and dry weather. * Do not mix directly with algaecides or herbicides If used in conjunction with algaecide or herbicide, apply REGEN-Floc® after algaecide and herbicide treatments |
| Child override REGEN-Floc Label |
Reviews
There are no reviews yet.